I saw a very interesting blog posting on how to shoot flowers using a light box. I took a different approach since I did not want to build a cardboard box so anything else. I took my large softbox and flipped it upside down. I could do this because I use C stands with boom arms and it becomes very easy to change the orientation of a modifier. I just made sure that the legs were in the right position to take up the low weight and added a few sand bags for good measure.
I then put a piece of clear plexiglass on top of the softbox or now light table and put my subject on top of that. I have a Photogenics 1250 strobe but now I would pull it and put in the 600 instead. The 1250 is too strong even turned down as low as it can go. I plan to try it with white plexiglass whereas I’m shooting with clear right now. The white should be worth a couple of stops.
I had a second mini softbox using an SB800 in SU mode on a monopod that I held over the subject. I manually set the SB800 to something around 1/8 power and about 3 feet high. I tried straight on, sideways and all kinds of angles. The best results seemed to be feathering the small soft box slightly to pick up some edge shadows.
I used a pair of Atlas pocket wizard clones on this shoot only because they were handy and my real PWs were packed away. I shot with:
Next time I will put the small light box on a second C stand instead of holding it. That was just too much trouble but I was in a real hurry to try this and get back to the family outside. The ladder was the only way I could get enough hight to shoot down on my subject, anywhere else and I was shooting across it and it did not work nearly as well.
- Cream-of-the-crop DIY Softbox Designs (makezine.com)
- DIY Photography Softbox from a Styrofoam Cooler [Video] (lifehacker.com)
- DIY lightbox repurposes useless scanner (hackaday.com)
- DIY softboxes light your photos on the cheap (hackaday.com)