After my bad mouthing the Canon G11 ergonomics, I was asked to show why I’m so bitter about such a lousy design. So here we go. A few close up shots of where my right hand thumb ends up while trying to shoot the G11.
The first picture below is a full back shot of the G11 showing the backside of the video screen and the right hand button controls.
Here is a close up of the offending buttons. As it turns out, my thumb lays right across the control wheel plus the selector button. So I’m always changing settings without knowing it unless I’m very careful in placement and pressure.
Now you can see what happens when I hold the camera in my right hand ready to shoot. My thumb which is not excessively large, manages to hit most of the buttons just by virtue of being there holding the camera.
Here is a side view of my thumb pressing into the buttons.
So hopefully you can see why I’m constantly cursing the design of the camera controls. I dont think the Canon engineers ever had actually USE the camera for any length of time. And trying to hold the camera in the vertical position is even worse. Now you thumb really does have to press down to steady and hold the camera. Did the engineers not even TRY to use the controls?
These shots were NOT taken with a G11, I shot these with my Nikon D90 and a 1.4 50mm lens almost wide open.
The first shot was taken with the G11 siting on the hood of my Explorer and in the shade. I blew out the background and popped the internal flash but dialed down 1.5 stops. I used LR and CS4 for post. I dialed down the saturation to get nice blacks on the body and I touched up the reflection to darken it a bit more.
The lanyard is for the quick release of the LumaLabs camera strap. Works great on the G11, not so good on my D300 with a 70-200 F2.8 lens hanging on it.